Floor boards
Floors are made of well-dried wood, the humidity does not exceed 8%.
Floor boards are made of fine wood:
Pine
Board size:
- Length from 1 m to 6 m
- Width 100 mm
- Thickness 30 mm
Pine flooring surface is resistant to shock, and therefore is not recommended to lay there in the room where extensive walking. This is an excellent cover of holiday homes, penthouses and the carpeting.
Ash
Board size:
- Length from 1 m to 6 m
- Width 50 mm, 80 mm
- Thickness 15 mm, 20 mm
Ash floorboards is a good natural cover for apartments, houses. They fit to lay even the kitchen. Characterized by a hard surface, and are not afraid of humidity, of course if properly varnished.
Oak
Board size:
- Length from 1 m to 6 m
- Width 50 mm, 80 mm, 100 mm
- Thickness 15 mm, 20 mm
The oak floor boards - the classics.
All the wooden boards apply some basic rules to be respected:
1. Do not lay the floor, when coupled with high humidity in the room. It is advisable to lay a wooden floor, the room is heated and ventilated.
2. Before using the batten should be in the room where it will be laid approximately 10 days. Then the moisture content of wood will come into compliance with the indoor environment.
3. From wall must be indented at least 10 mm.
4. Once laid the floor, must pass 7 days prior to sanding.
5. During grinding can not use coarse abrasives. Remain minor scratches, which are then difficult to remove.
6. Floor covered with parquet lacquer in 3 layers, most appropriate and recommended four layers.
